-
168 people found this review helpful September 11, 2020overall
FIT & FINISH
DESIGN
Was this review helpful? Yes
|
|
|||
Prev 
Next
Showing #56 of Slash Parts
LOADING IMAGES
|
PART: #RPM/80905
|
This item ships Free WORLDWIDE. Details
|
|
|||||||||||||||||||||
CUSTOMER REVIEWS
This product currently has 1 reviews
Overall Rating:
|
 |
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
| Quantity Discount | |||
|---|---|---|---|
| Units at this Price | ATees' Low Price (Per Unit) |
You Save | Click To Order |
TAGGED CATEGORIES:
- After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.
The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance.
Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.
The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!
- Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.
Quick Notes:
- Fits the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit
- Replaces Traxxas stock #3677
- Will fit:
- Package total weight: 34.00 grams (incl. packaging)
- Factory description: RPM Traxxas Slash Mount For A Rear Bumper Or Wheelie Bar - Blue
- Manufactured by RPM
- Manufacturer number: RPM/80905
- This item is eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
Traxxas
Slash Parts & Upgrades
Mount For A Rear Bumper Or Wheelie Bar - Blue
by RPM
LOADING IMAGES
|
|
|
Tagged Categories
- After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.
The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance.
Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.
The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!
- Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.
Quick Notes:
- Fits the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit
- Replaces Traxxas stock #3677
- Will fit:
- Product weight: 34.00 grams
- Factory description: RPM Traxxas Slash Mount For A Rear Bumper Or Wheelie Bar - Blue
- Manufactured by RPM
- Manufacturer number: RPM/80905
- This item is eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
| Quantity Discount | |||
|---|---|---|---|
| Units at this Price | ATees' Low Price (Per Unit) |
You Save | Click To Order |
This product currently has 1 reviews
Overall Rating:
|
|
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
The Traxxas Slash Mount For A Rear Bumper Or Wheelie Bar - Blue has an average rating of
stars based on 1 customer reviews.
Products Built Like A Brick
RPM was established in 1974 as a plastic mold making facility. Many of the first high tolerance, precision molded parts built were for the commercial and medical industries, where accuracy is critical. Every single molded product made by RPM is conceived, designed, built, and manufactured in its facility in Chino, California!
Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture, and produce its own products gives the company the best possible quality control over their parts. Excellent quality control, in turn, gives our customers the best possible parts! All the RPM parts are available at the largest online RC store here.
RPM was established in 1974 as a plastic mold making facility. Many of the first high tolerance, precision molded parts built were for the commercial and medical industries, where accuracy is critical. Every single molded product made by RPM is conceived, designed, built, and manufactured in its facility in Chino, California!
Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture, and produce its own products gives the company the best possible quality control over their parts. Excellent quality control, in turn, gives our customers the best possible parts! All the RPM parts are available at the largest online RC store here.
Recent Customer Reviews - 1 Reviews Total 
The Traxxas Slash Mount For A Rear Bumper Or Wheelie Bar - Blue has an average rating of
stars based on 1 customer reviews.
-
168 people found this review helpful September 11, 2020overall
FIT & FINISH
DESIGN
Was this review helpful? Yes
About RPM
Products Built Like A Brick
RPM was established in 1974 as a plastic mold making facility. Many of the first high tolerance, precision molded parts built were for the commercial and medical industries, where accuracy is critical. Every single molded product made by RPM is conceived, designed, built, and manufactured in its facility in Chino, California!
Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture, and produce its own products gives the company the best possible quality control over their parts. Excellent quality control, in turn, gives our customers the best possible parts! All the RPM parts are available at the largest online RC store here.
RPM was established in 1974 as a plastic mold making facility. Many of the first high tolerance, precision molded parts built were for the commercial and medical industries, where accuracy is critical. Every single molded product made by RPM is conceived, designed, built, and manufactured in its facility in Chino, California!
Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture, and produce its own products gives the company the best possible quality control over their parts. Excellent quality control, in turn, gives our customers the best possible parts! All the RPM parts are available at the largest online RC store here.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.