This is the updated version of our popular N2R High Clearance Skid for the Traxxas TRX-4. We have gained 4mm of additional ground clearance compared to the stock skid in critical areas, and we have created smoother surfaces with better angles for sliding over roots and rocks with ease. V2 is printed in ultra strong, ultra high resolution nylon.
Package includes:
1x skid
1x M3x8 FHCS
2x M3X16 BHCS
1x M3x8 BHCS
2x M3x30 BHCS
Installation notes:
Reuse stock hardware in stock locations EXCEPT as follows:
(a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
(b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
(c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
(d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
Completely remove side tray on right side before installing N2R skid
Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
Tighten all screws by hand and be careful not to overtighten. Use of power drivers may result in stripping out screw holes in the N2R skid.
Package total weight: 57.00 grams (incl. packaging)
Factory description: BowHouse RC Traxxas TRX-4 N2R High Clearance Skid for Traxxas TRX-4 v2
This is the updated version of our popular N2R High Clearance Skid for the Traxxas TRX-4. We have gained 4mm of additional ground clearance compared to the stock skid in critical areas, and we have created smoother surfaces with better angles for sliding over roots and rocks with ease. V2 is printed in ultra strong, ultra high resolution nylon.
Package includes:
1x skid
1x M3x8 FHCS
2x M3X16 BHCS
1x M3x8 BHCS
2x M3x30 BHCS
Installation notes:
Reuse stock hardware in stock locations EXCEPT as follows:
(a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
(b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
(c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
(d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
Completely remove side tray on right side before installing N2R skid
Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
Tighten all screws by hand and be careful not to overtighten. Use of power drivers may result in stripping out screw holes in the N2R skid.
Product weight: 57.00 grams
Factory description: BowHouse RC Traxxas TRX-4 N2R High Clearance Skid for Traxxas TRX-4 v2
It all started with a trail run. After watching David's TF2 hang up on every rock and root and blade of grass for 2 hours, Nick said, "Hey, I can fix that for you." A couple of weeks later, Nick gave David a prototype that he said he'd need back (David still hasn't given it back), and the N2R skid was born. Originally sold as a Helios RC product, the feedback was so good that we decided to form BowHouse RC to create more cool stuff for your RC trucks.
We've now expanded our offerings to include parts for the Axial SCX10 / SCX10 II, Traxxas TRX-4, HPI Venture, GCM CMAX, as well as a full line of axles for your scale builds.
All of our parts are developed in-house using sophisticated 3D scanning technology and CAD modelling. We choose materials that are both strong enough and flexible enough to withstand plenty of abuse. Most parts are printed using either selective laser sintering (SLS nylon) or carbon fiber-reinforced nylon filament.
We have plenty of new products in the works, and we're always open to hearing about products you'd like to see. So if you're looking for something we don't have, feel free to send us an email. Thanks for visiting our site!
It all started with a trail run. After watching David's TF2 hang up on every rock and root and blade of grass for 2 hours, Nick said, "Hey, I can fix that for you." A couple of weeks later, Nick gave David a prototype that he said he'd need back (David still hasn't given it back), and the N2R skid was born. Originally sold as a Helios RC product, the feedback was so good that we decided to form BowHouse RC to create more cool stuff for your RC trucks.
We've now expanded our offerings to include parts for the Axial SCX10 / SCX10 II, Traxxas TRX-4, HPI Venture, GCM CMAX, as well as a full line of axles for your scale builds.
All of our parts are developed in-house using sophisticated 3D scanning technology and CAD modelling. We choose materials that are both strong enough and flexible enough to withstand plenty of abuse. Most parts are printed using either selective laser sintering (SLS nylon) or carbon fiber-reinforced nylon filament.
We have plenty of new products in the works, and we're always open to hearing about products you'd like to see. So if you're looking for something we don't have, feel free to send us an email. Thanks for visiting our site!
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.