Dual external control channels, real-time adjustment of parameters.
The XeRun AXE R3 is equipped with a FOC drive system. The large torque and excellent linearity when operating at low speed further exceed ordinary brushless power systems and out performs brushed power systems. The XeRun AXE R3 is nearly silent, and it’s the perfect choice for crawling vehicles.
The ESC automatically increases the torque output to overcome resistance and accelerate up the hill. Vice versa, the ESC automatically reduces the torque output and stabilizes the vehicle speed when going down the hill. Provides excellent control going Up, or Down hills.
The ESC is powerful, with excellent linear control, which can meet the needs of the vehicle's low-speed climbing while also meeting the needs of violent start-up lifting, straight-line high speed, etc.
The fan starts to operate automatically ONLY when the ESC temperature reaches the preset value. The smart start and stop function of the fan helps to save power, reduce noise, and also ensures that the ESC works in a good temperature range.
The AXE R3 brushless system is now IP67 protected. It has excellent waterproofing and dust-proofing performance to cope with various climatic conditions.
Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Do not submerge in water for a long time, otherwise the product may be damaged.
It has a built-in powerful BEC with a maximum output current of 15A. The voltage is switchable between 6V/7.4V/8.4V and is suitable for various standard/high-voltage servos and peripheral electrical equipment on the market (such as light sets, winches, etc.).
The ESC has a built-in Bluetooth module. Parameter settings, data reading, firmware upgrade and other operations can be achieved by connecting the device to the mobile APP.
Connect the ESC to the HW Link mobile app and turn on the real-time data function. You are able to view throttle, voltage, current, temperature, speed and other data in real time, and obtain the ESC and motor operating status with ease.
Note: The effective distance is only about 5m due to transmission distance of bluetooth.
The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 saved to the ESC. In addition, the module allows you to view Time Data from the ESC for bench top testing and viewing of the data outputs.
AXE R3 ESC supports both AXE 4274 R3 motor and AXE 550/540L/540 R2 motor.
Note: AXE R2 motor, 2800KV/2100KV/1400KV/2300kv are recommended to use 3-4S.
Achieve real-time ESC parameter adjustments using the I-BUS2 Telemetry on the Flysky NB4 controllers. Additionally, the data return function has been implemented to the Flysky NB4 remote controllers. You will be able to view data such as; battery voltage, motor speed, operating current, ESC/motor temperature, etc in real time on the remote control.
Note: You are required to upgrade to the latest firmware on your remote control in order to use the I-BUS2 functions.
The XeRun AXE R3 has a vast variety of parameters for adjustment. It has a total of 21 adjustable parameters and supports 24-degree adjustable Turbo timing. The maximum speed can be unleashed with good road conditions.
XERUN-AXE4274SD-2000KV-BLACK-R3 FOC Sensored Brushless Motor Features:
The XeRun AXE R3 motor supports up to 6S LiPo.
Note: The default mounting hole is 25.4mm. Please purchase the AXE 4274 motor conversion board if the mounting hole is 30mm.
AXE 4274 R3 is available in both 1700/2000KV options. It meets various application requirements for 1/8th, 1/7th, and 1/6th scale crawlers.
The AXE R3 motor is now IP67 protected. The motor has the proven HobbyWing waterproof sensor harness design to cope with complex and various climatic conditions.
Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Extended water exposure (submersion) may lead to damage.
The motor has a built-in magnetic encoding sensor. The accuracy is 60 times better compared to the traditional sensor commonly used in brushless motors. The three-phase signal has excellent consistency and it provides accurate signals from the rotor position.
The XeRun AXE R3 motor is built-in with 4 sets of 25.4mm mounting holes, and 4 for M3/M4 respectively. If the frame mounting holes are 30mm, an optional motor mounting conversion plate is available for purchase.
Note: The conversion plate is an optional accessory and needs to be purchased separately! (PN: 30850501)
Premium Materials, Performance Upgrade: Crafted with high-quality aluminum CNC shell, top-tier brand bearings, ultra-thin silicon steel sheets, 200°C high-temperature-resistant enameled wire, and a high-toughness alloy output shaft. HobbyWing is dedicated to delivering exceptional performance to users worldwide. Elevate your crawler's performance to new heights with the XeRun AXE R3 motor.
Specification:
Scale: 1/8th, 1/6th
Brushed/Brushless: BL
Sensored/Sensorless: SD
Pole Count: 4
Relevant Parameters:
KV Rating: 2000KV
LiPo Cells: 3-6S Lipo
No-load Current(A): 4.54A
Size & Weight:
O.D.(mm): 42
Length (mm): 74
Shaft Diameter (mm): 5
Plug: No
Wire: 12AWG*250MM*3
Weight (g): 415g
Other Parameters:
Recommended ESC: XERUN AXE PLUS R3
Vehicle Applications: 1/8th, 1/6th Rock Crawler
Package total weight: 791.00 grams (incl. packaging)
Package size: 16.00 x 19.00 x 8.00cm
Factory description: Hobbywing 1/8 & 1/6 Scale FOC Rock Crawler Combo AXE Plus R3 & AXE4274SD-2000KV-R3
Dual external control channels, real-time adjustment of parameters.
The XeRun AXE R3 is equipped with a FOC drive system. The large torque and excellent linearity when operating at low speed further exceed ordinary brushless power systems and out performs brushed power systems. The XeRun AXE R3 is nearly silent, and it’s the perfect choice for crawling vehicles.
The ESC automatically increases the torque output to overcome resistance and accelerate up the hill. Vice versa, the ESC automatically reduces the torque output and stabilizes the vehicle speed when going down the hill. Provides excellent control going Up, or Down hills.
The ESC is powerful, with excellent linear control, which can meet the needs of the vehicle's low-speed climbing while also meeting the needs of violent start-up lifting, straight-line high speed, etc.
The fan starts to operate automatically ONLY when the ESC temperature reaches the preset value. The smart start and stop function of the fan helps to save power, reduce noise, and also ensures that the ESC works in a good temperature range.
The AXE R3 brushless system is now IP67 protected. It has excellent waterproofing and dust-proofing performance to cope with various climatic conditions.
Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Do not submerge in water for a long time, otherwise the product may be damaged.
It has a built-in powerful BEC with a maximum output current of 15A. The voltage is switchable between 6V/7.4V/8.4V and is suitable for various standard/high-voltage servos and peripheral electrical equipment on the market (such as light sets, winches, etc.).
The ESC has a built-in Bluetooth module. Parameter settings, data reading, firmware upgrade and other operations can be achieved by connecting the device to the mobile APP.
Connect the ESC to the HW Link mobile app and turn on the real-time data function. You are able to view throttle, voltage, current, temperature, speed and other data in real time, and obtain the ESC and motor operating status with ease.
Note: The effective distance is only about 5m due to transmission distance of bluetooth.
The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 saved to the ESC. In addition, the module allows you to view Time Data from the ESC for bench top testing and viewing of the data outputs.
AXE R3 ESC supports both AXE 4274 R3 motor and AXE 550/540L/540 R2 motor.
Note: AXE R2 motor, 2800KV/2100KV/1400KV/2300kv are recommended to use 3-4S.
Achieve real-time ESC parameter adjustments using the I-BUS2 Telemetry on the Flysky NB4 controllers. Additionally, the data return function has been implemented to the Flysky NB4 remote controllers. You will be able to view data such as; battery voltage, motor speed, operating current, ESC/motor temperature, etc in real time on the remote control.
Note: You are required to upgrade to the latest firmware on your remote control in order to use the I-BUS2 functions.
The XeRun AXE R3 has a vast variety of parameters for adjustment. It has a total of 21 adjustable parameters and supports 24-degree adjustable Turbo timing. The maximum speed can be unleashed with good road conditions.
XERUN-AXE4274SD-2000KV-BLACK-R3 FOC Sensored Brushless Motor Features:
The XeRun AXE R3 motor supports up to 6S LiPo.
Note: The default mounting hole is 25.4mm. Please purchase the AXE 4274 motor conversion board if the mounting hole is 30mm.
AXE 4274 R3 is available in both 1700/2000KV options. It meets various application requirements for 1/8th, 1/7th, and 1/6th scale crawlers.
The AXE R3 motor is now IP67 protected. The motor has the proven HobbyWing waterproof sensor harness design to cope with complex and various climatic conditions.
Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Extended water exposure (submersion) may lead to damage.
The motor has a built-in magnetic encoding sensor. The accuracy is 60 times better compared to the traditional sensor commonly used in brushless motors. The three-phase signal has excellent consistency and it provides accurate signals from the rotor position.
The XeRun AXE R3 motor is built-in with 4 sets of 25.4mm mounting holes, and 4 for M3/M4 respectively. If the frame mounting holes are 30mm, an optional motor mounting conversion plate is available for purchase.
Note: The conversion plate is an optional accessory and needs to be purchased separately! (PN: 30850501)
Premium Materials, Performance Upgrade: Crafted with high-quality aluminum CNC shell, top-tier brand bearings, ultra-thin silicon steel sheets, 200°C high-temperature-resistant enameled wire, and a high-toughness alloy output shaft. HobbyWing is dedicated to delivering exceptional performance to users worldwide. Elevate your crawler's performance to new heights with the XeRun AXE R3 motor.
Specification:
Scale: 1/8th, 1/6th
Brushed/Brushless: BL
Sensored/Sensorless: SD
Pole Count: 4
Relevant Parameters:
KV Rating: 2000KV
LiPo Cells: 3-6S Lipo
No-load Current(A): 4.54A
Size & Weight:
O.D.(mm): 42
Length (mm): 74
Shaft Diameter (mm): 5
Plug: No
Wire: 12AWG*250MM*3
Weight (g): 415g
Other Parameters:
Recommended ESC: XERUN AXE PLUS R3
Vehicle Applications: 1/8th, 1/6th Rock Crawler
Product weight: 791.00 grams
Package size: 16.00 x 19.00 x 8.00cm
Factory description: Hobbywing 1/8 & 1/6 Scale FOC Rock Crawler Combo AXE Plus R3 & AXE4274SD-2000KV-R3
Innovation Powered By Passion Hobbywing, as a global leader in the field of brushless motors and control systems for RC models, provides their customers with the perfect experience that beyond their expectation and help them to realize their dreams.
Major products at Hobbywing includes brushless motor and controllers for RC models, while subsidiary products include other electronic equipments that may be adopted on RC models.
Innovation Powered By Passion Hobbywing, as a global leader in the field of brushless motors and control systems for RC models, provides their customers with the perfect experience that beyond their expectation and help them to realize their dreams.
Major products at Hobbywing includes brushless motor and controllers for RC models, while subsidiary products include other electronic equipments that may be adopted on RC models.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.