ROAR approved Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
Built-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with an HW sensored ESC (i.e. XR8 SCT/Plus), the motor can work in the “sensored” mode at all times with great output linearity after the identification. The Turbo timing is allowed to be activated for higher output.
Magnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in the “sensored” mode.
With the mechanical timing adjustable from 20 degrees to 40 degrees, users are able to have different output power.
Turbine design implemented by the rotor accelerates the internal air circulation and reduces heat.
Rebuildable design (partially rebuild-able) and a screw-less motor case for easy routine maintenance effectively prolong the motor life and raise the motor efficiency.
CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
New-style “U” solder tabs at the bottom of the motor for easy soldering and wiring.
Specification:
KV (no load): 5100
POLE: 4
LiPo (V): 2S
No Load Current: 4.7A
Resistance: 0.0035Ω
Diameter: 36mm
Length w/o Shaft: 56mm
Shaft diameter: 5mm
Weigh: 192g
Adjustable timing: 20-40 degree
Motor Dimension: Φ=36mm (1.417in) L=52.5mm (2.067in)
The “Maximum Output Power” is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the “maximum input power” nor the “rating power”, it is calculated by “RPM x Torque / 9550”. Because each factory runs a different testing platform, the above data may vary.
Max Amp is the “Current at Max Output Power” It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings/configuration is over its peak (or in other words, “overloaded”).
The “KV” is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.
Package total weight: 313.00 grams (incl. packaging)
ROAR approved Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
Built-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with an HW sensored ESC (i.e. XR8 SCT/Plus), the motor can work in the “sensored” mode at all times with great output linearity after the identification. The Turbo timing is allowed to be activated for higher output.
Magnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in the “sensored” mode.
With the mechanical timing adjustable from 20 degrees to 40 degrees, users are able to have different output power.
Turbine design implemented by the rotor accelerates the internal air circulation and reduces heat.
Rebuildable design (partially rebuild-able) and a screw-less motor case for easy routine maintenance effectively prolong the motor life and raise the motor efficiency.
CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
New-style “U” solder tabs at the bottom of the motor for easy soldering and wiring.
Specification:
KV (no load): 5100
POLE: 4
LiPo (V): 2S
No Load Current: 4.7A
Resistance: 0.0035Ω
Diameter: 36mm
Length w/o Shaft: 56mm
Shaft diameter: 5mm
Weigh: 192g
Adjustable timing: 20-40 degree
Motor Dimension: Φ=36mm (1.417in) L=52.5mm (2.067in)
The “Maximum Output Power” is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the “maximum input power” nor the “rating power”, it is calculated by “RPM x Torque / 9550”. Because each factory runs a different testing platform, the above data may vary.
Max Amp is the “Current at Max Output Power” It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings/configuration is over its peak (or in other words, “overloaded”).
The “KV” is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.
Innovation Powered By Passion Hobbywing, as a global leader in the field of brushless motors and control systems for RC models, provides their customers with the perfect experience that beyond their expectation and help them to realize their dreams.
Major products at Hobbywing includes brushless motor and controllers for RC models, while subsidiary products include other electronic equipments that may be adopted on RC models.
Innovation Powered By Passion Hobbywing, as a global leader in the field of brushless motors and control systems for RC models, provides their customers with the perfect experience that beyond their expectation and help them to realize their dreams.
Major products at Hobbywing includes brushless motor and controllers for RC models, while subsidiary products include other electronic equipments that may be adopted on RC models.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.