-
365 people found this review helpful June 14, 2016
If you are looking for the cleaning build without wire spaghetti, this is the 4-in-1 for you. It's not just any ordinary board, they are the PROVEN Littlebee Pro power that's reliable and efficient. Save weight and gain performance by using this ESC on your next quad build.
Other Upgrades/Parts Recommended by Reviewer: ArkoverallFIT & FINISHDESIGNWas this review helpful? Yes
All Parts & UpgradesFVT LittleBee LittleBee PRO 20Ax4 ESC With 5V BEC BLHeli 2-4S F396 OneShot125 For RC Multirotors |
||||
|
|
This product currently has 1 reviews
Overall Rating:
|
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
- LittleBee is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional braking capabilities.
FVT is only using the best components available, period.
We know that with mini quads, every gram counts. LittleBee is only 24.5×12.5mm, and weights only 4g, (6.7g with wires) enabling your builds to be even smaller and lighter!
To unleash it’s full potential, LittleBee has been designed to run BLHELI firmware. Factory flashed with BLHELI 14, it’s ready for action!
Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
With the BLHELI software rapidly evolving, you can flash the newest firmware using the 3pin connector and suitable USB adapter*
Once connected, you will get access to a number of settings that control behavior of your ESC controller.
Enable OneShot125, Damped light mode, reverse motor direction, all available on one easy to use screen.
Capable of running 3s and 4s setups, LittleBee can work with up to 20A continuous load, and 30A peak (10s).
So far, this is the closest performer to KISS that we have seen in this size, and it is the esc of choice by the Colorado Racing Quad Club
Features:
- The Latest BLHeli Firmware
- Silabs MCU
- DLM and Oneshot Capable
- FVT LITTLEBEE 20A ESC
- Input: 2-4s Lipo
- Constant: 20 Amps
- Burst: 30 Amps
- Weight: 4g w/wires
- Dimensions: 23×12.5x3mm
- Motor wire: 50mm 20g
- Signal wire: 100mm 22g
- MCU: Silabs
- PCB – 4 Layer Blind Pole PCB – 3oz Pour
- Mosfet: N-Channel
- BEC: None
- Package total weight: 21.00 grams (incl. packaging)
- Factory description: FVT LittleBee LittleBee PRO 20Ax4 ESC With 5V BEC BLHeli 2-4S F396 OneShot125 For RC Multirotors
- Manufactured by FVT LittleBee
- Manufacturer number: LB/Littlebee20Ax4
- This item is eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
LittleBee PRO 20Ax4 ESC With 5V BEC BLHeli 2-4S F396 OneShot125 For RC Multirotors by FVT LittleBee
- LittleBee is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional braking capabilities.
FVT is only using the best components available, period.
We know that with mini quads, every gram counts. LittleBee is only 24.5×12.5mm, and weights only 4g, (6.7g with wires) enabling your builds to be even smaller and lighter!
To unleash it’s full potential, LittleBee has been designed to run BLHELI firmware. Factory flashed with BLHELI 14, it’s ready for action!
Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
With the BLHELI software rapidly evolving, you can flash the newest firmware using the 3pin connector and suitable USB adapter*
Once connected, you will get access to a number of settings that control behavior of your ESC controller.
Enable OneShot125, Damped light mode, reverse motor direction, all available on one easy to use screen.
Capable of running 3s and 4s setups, LittleBee can work with up to 20A continuous load, and 30A peak (10s).
So far, this is the closest performer to KISS that we have seen in this size, and it is the esc of choice by the Colorado Racing Quad Club
Features:
- The Latest BLHeli Firmware
- Silabs MCU
- DLM and Oneshot Capable
- FVT LITTLEBEE 20A ESC
- Input: 2-4s Lipo
- Constant: 20 Amps
- Burst: 30 Amps
- Weight: 4g w/wires
- Dimensions: 23×12.5x3mm
- Motor wire: 50mm 20g
- Signal wire: 100mm 22g
- MCU: Silabs
- PCB – 4 Layer Blind Pole PCB – 3oz Pour
- Mosfet: N-Channel
- BEC: None
- Product weight: 21.00 grams
- Factory description: FVT LittleBee LittleBee PRO 20Ax4 ESC With 5V BEC BLHeli 2-4S F396 OneShot125 For RC Multirotors
- Manufactured by FVT LittleBee
- Manufacturer number: LB/Littlebee20Ax4
- This item is eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
Quantity Discount | |||
---|---|---|---|
Units at this Price | ATees' Low Price (Per Unit) |
You Save | Click To Order |
This product currently has 1 reviews
Overall Rating:
|
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
The Miscellaneous All LittleBee PRO 20Ax4 ESC With 5V BEC BLHeli 2-4S F396 OneShot125 For RC Multirotors has an average rating of stars based on 1 customer reviews.
Why choose LittleBee? LittleBee is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional braking capabilities. We're only using the best components available, period. And, as we build these in our own factory, our experienced staff ensures you're getting the best of the best! We know that with mini quads, every gram counts. LittleBee 20A is only 24.5x12.5mm, and weights only 4g, whilst LittleBee 30A is 35x17mm and weights 11g. Your multirotors can be smaller and lighter than ever before!
Recent Customer Reviews - 1 Reviews Total
The Miscellaneous All LittleBee PRO 20Ax4 ESC With 5V BEC BLHeli 2-4S F396 OneShot125 For RC Multirotors has an average rating of stars based on 1 customer reviews.
-
365 people found this review helpful June 14, 2016
If you are looking for the cleaning build without wire spaghetti, this is the 4-in-1 for you. It's not just any ordinary board, they are the PROVEN Littlebee Pro power that's reliable and efficient. Save weight and gain performance by using this ESC on your next quad build.
Other Upgrades/Parts Recommended by Reviewer: ArkoverallFIT & FINISHDESIGNWas this review helpful? Yes
About FVT LittleBee
Why choose LittleBee? LittleBee is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional braking capabilities. We're only using the best components available, period. And, as we build these in our own factory, our experienced staff ensures you're getting the best of the best! We know that with mini quads, every gram counts. LittleBee 20A is only 24.5x12.5mm, and weights only 4g, whilst LittleBee 30A is 35x17mm and weights 11g. Your multirotors can be smaller and lighter than ever before!