Currently all feedbacks are left by AsiaTees customers.
PRODUCT INFORMATION:
Description: RPM landing gear for the LaTrax Alias quadcopter.
The LaTrax Alias is a tiny, fun and competent flyer, yet suffers from ground clearance issues. If you happen to land in grass, there is a chance you can accidentally strike a blade, which in turn, can cause a motor failure. Since the Alias is geared towards the entry-level flyer, there is a need for more cushioning in the landing system. The stock small rubber foot may not have enough cushioning effect to save a harsh landing.
RPM landing gear for the LaTrax Alias solves both of these issues. These replace the stock rubber foot with a solidly mounted, curved 'spring' made from our engineering grade, ultra-lightweight nylons. The curved 'spring' adds impact-absorption to the air-frame, helping to reduce or eliminate damage from questionable landings. The landing gear also elevates the Alias an additional 0.8" (20mm), reducing the probability of a blade strike in grass or during bad landings.
The landing gear spreads the center point of each leg further out by 0.45" (11.5mm) each leg, or 0.9" (23mm) in total, adding stability to take-offs and landings. The ends of each leg are curved upwards making them less likely to catch or hook on objects when one leg is grounded and the other three airborne.
The entire set-up only adds 4.5 grams to the total weight of the Alias, causing minimal to no effect on performance and overall battery life.
Sold as a set of four legs. Available in blue or black.
Replaces the following parts: Traxxas #6649 (Feet)
Package total weight: 14.00 grams (incl. packaging)
Factory description: RPM LaTrax Alias Landing Gear - Black (4)
Description: RPM landing gear for the LaTrax Alias quadcopter.
The LaTrax Alias is a tiny, fun and competent flyer, yet suffers from ground clearance issues. If you happen to land in grass, there is a chance you can accidentally strike a blade, which in turn, can cause a motor failure. Since the Alias is geared towards the entry-level flyer, there is a need for more cushioning in the landing system. The stock small rubber foot may not have enough cushioning effect to save a harsh landing.
RPM landing gear for the LaTrax Alias solves both of these issues. These replace the stock rubber foot with a solidly mounted, curved 'spring' made from our engineering grade, ultra-lightweight nylons. The curved 'spring' adds impact-absorption to the air-frame, helping to reduce or eliminate damage from questionable landings. The landing gear also elevates the Alias an additional 0.8" (20mm), reducing the probability of a blade strike in grass or during bad landings.
The landing gear spreads the center point of each leg further out by 0.45" (11.5mm) each leg, or 0.9" (23mm) in total, adding stability to take-offs and landings. The ends of each leg are curved upwards making them less likely to catch or hook on objects when one leg is grounded and the other three airborne.
The entire set-up only adds 4.5 grams to the total weight of the Alias, causing minimal to no effect on performance and overall battery life.
Sold as a set of four legs. Available in blue or black.
Replaces the following parts: Traxxas #6649 (Feet)
Product weight: 14.00 grams
Factory description: RPM LaTrax Alias Landing Gear - Black (4)
Products Built Like A Brick RPM was established in 1974 as a plastic mold making facility. Many of the first high tolerance, precision molded parts built were for the commercial and medical industries, where accuracy is critical. Every single molded product made by RPM is conceived, designed, built, and manufactured in its facility in Chino, California!
Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture, and produce its own products gives the company the best possible quality control over their parts. Excellent quality control, in turn, gives our customers the best possible parts! All the RPM parts are available at the largest online RC store here.
Products Built Like A Brick RPM was established in 1974 as a plastic mold making facility. Many of the first high tolerance, precision molded parts built were for the commercial and medical industries, where accuracy is critical. Every single molded product made by RPM is conceived, designed, built, and manufactured in its facility in Chino, California!
Very few manufacturers have the capabilities that RPM has for full in-house production. This ability to design, manufacture, and produce its own products gives the company the best possible quality control over their parts. Excellent quality control, in turn, gives our customers the best possible parts! All the RPM parts are available at the largest online RC store here.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.