Don’t Be Afraid to Get Wet!
Sidewinder 3 with 1406-4600Kv censored* brushless motor is the perfect waterproof** combo for 1:10 scale off-road, on-road, and rock crawlers running up to 3S LiPo***. It sports updated circuitry for faster response time and improved reliability. This combo now comes with our new sensored* motor. While the sensored capabilities of the motor cannot be utilized with the Sidewinder 3, users will benefit as the sensored motor is rebuildable and this design even allows modelers to replace damaged motor wires. The Sidewinder 3 Combo will give you exceptional response and performance right of the box!
This combo includes a Sidewinder 3 ESC and 1406-4600Kv sensored* motor. The 1406-4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and is geared conservatively. It makes a great combo for 1/10th 2WD Stadium trucks and buggies on 2s for general bashing and limited runs on 3s; temperatures will climb quickly on 3s. It makes a great upgrade for 1/10th scale on-road cars for 2s and 3s use. NOT for use in 4WD short-course trucks.
Please refer to our Gearing Chart for recommended motors, batteries, and gearing for some of the more popular vehicles on the market.
Sidewinder 3 combo includes:
- Sidewinder 3 ESC
- Castle 1406 1Y 4600 Kv sensored* motor
- Driver's Ed and Quick Start Guide
- Decal sheet
* Sensored capabilities of the motor cannot be utilized with the Sidewinder 3. If you require sensored operation you will need a sensored ESC like the Mamba X. The Mamba X paired with the same motor can be found here.
*Not intended for operation while submerged in liquid. If the unit is operated in wet conditions, rinse it with fresh water to remove dirt or corrosives, then fully dry the unit.
***Brushed motors are recommended for rock crawlers (vehicles traveling 3-5mph.) Brushless motors are fine for use with rock racing. If your vehicle is going to be in a bound-up situation, very slowly traversing rocks and obstacles, you are running a rock crawler. If you are constantly traveling at 5mph or higher, you have a rock racer.
TECHNICAL SPECIFICATIONS:
Controller
- Input Voltage Range: 2s - 3s LiPo; 6 - 8 cell NiMH (7700kv motor is limited to 2s)
- BEC Specifications: 5.0 volts fixed. 2 amps
- Operating Environment: Waterproof* design allows for use in nearly any environment
- Brake: Proportional
- Reversible: Yes, but may be disabled for racing.
- On/Off Switch: Yes
- Cooling Fan: Available, but not included
- ESC Size:
- L: 1.93" (49mm)
- W: 1.48" (38mm)
- H: 0.79" (20mm)
- ESC Weight (w/wires): 1.96 oz. (55.5 g)
- Connectors: 4mm female bullets for motor connection.
- Items Needed for Operation: Battery Connector required; Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended.
- Product Use Statements: *Although Sidewinder 3 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio, and chassis are also waterproof before exposing them to liquids of any kind.
- Application Guidelines:
- For 2WD short course trucks on 2s LiPo and geared conservatively.
- 1/10th 2WD Stadium trucks and buggies on 2s for bashing and limited runs on 3s with conservative gearing.
- Great for 1/10th scale on-road cars for 2s and 3s use.
- NOT for use in 4WD short-course trucks.
- Please refer to our Gearing Chart for recommended motors, batteries, and gearing for some of the more popular vehicles on the market.
- Recommended Motors: Combo includes a 1406-4600kv motor.
- Max. Recommended Vehicle Weight: No more than 4lbs with battery, ready-to-run.
- Programmability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software or the Castle Link iOS App and a B-LINK Bluetooth Adapter (sold separately).
- Telemetry Link Capable: No
- Tech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Brushless setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high-quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
MOTOR TECHNICAL SPECIFICATIONS:
- Input Voltage Range: 2S LiPo
- Kv: 7700
- Max. RPM: 100,000
- Size:
- Length: 49.5mm
- Diameter: 36mm
- Weight (w/wires): 193g/ 6.8oz
- Shaft Size:
- Length: 15mm
- Diameter: 1/8" (3.17mm)
- Mounting Hole Specifications: M3 @ 25mm
- Cooling Fan: Optional- Coming Soon!
- Connectors: 4mm male Castle Bullet Connectors
- Application Guidelines:
- For 2WD short course trucks on 2s LiPo and geared conservatively.
- 1/10th 2WD Stadium trucks and buggies on 2s for bashing and limited runs on 3s with conservative gearing.
- Great for 1/10th scale on-road cars for 2s and 3s use.
- NOT for use in 4WD short-course trucks.
- Please refer to our Gearing Chart for recommended motors, batteries, and gearing for some of the more popular vehicles on the market.
- Max. Recommended Vehicle Weight: 4lbs
- Tech Notes:
- Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the motor or ESC.
- Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.